Konica Minolta Bizhub C454e photocopier in an office building

Konica Minolta colour laser — shown for reference; your model may look different. Baron Maddock · CC BY 4.0

Konica Minolta · magicolor colour laser MFP

Konica Minolta magicolor 1690MF: Setup, Drivers, Ink and Common Problems

Colour laser Released 2008 Legacy Around $399 new

The magicolor 1690MF was Konica Minolta's budget colour laser all-in-one for home offices, a four-in-one with ADF and fax that sold for around $400 in 2008. The engine is slow in colour and the toner cartridges are small, and the printer refuses to print at all when any colour runs out. Windows 11 support depends on the archived driver; it usually installs, but macOS support has effectively ended.

Sold in United States, Canada, United Kingdom, Europe, Australia

Print speed
20 ppm mono / 5 ppm colour
Two-sided
Manual
Document feeder
35-sheet ADF
Paper capacity
200 sheets
Resolution
2400 x 600 dpi
Display
2-line LCD

Is the Konica Minolta magicolor 1690MF right for you?

The magicolor 1690MF was Konica Minolta's budget colour laser all-in-one for home offices, a four-in-one with ADF and fax that sold for around $400 in 2008. The engine is slow in colour and the toner cartridges are small, and the printer refuses to print at all when any colour runs out. Windows 11 support depends on the archived driver; it usually installs, but macOS support has effectively ended.

Best for: Home offices keeping a 2008 colour laser MFP in service

Setting up the Konica Minolta magicolor 1690MF

Find the magicolor 1690MF driver in Konica Minolta's archived downloads; install it before connecting USB, or add it by IP over Ethernet. The scan driver is a separate TWAIN package. If the Windows installer refuses, extract it and use Add Printer with 'Have Disk' pointing at the INF file.

  1. Unbox and prepare. Remove every piece of shipping tape and packing material, install the toner cartridge and drum unit, and load paper in the tray.
  2. Join your Wi-Fi. Keep the printer close to the router for setup. Most printers only connect to the 2.4GHz band, so if your router broadcasts one merged network name you may need to split the bands temporarily. See our Wi-Fi guide if it will not join.
  3. Install the setup app. Use Konica Minolta's official app rather than a driver you found on a search result — third-party driver sites are the most common source of printer malware.
  4. Add the printer. On Windows 11: Settings › Bluetooth & devices › Printers & scanners › Add device. On macOS: System Settings › Printers & Scanners › Add Printer.
  5. Print a test page and run a scan if this is an all-in-one, so you find any problem now rather than when you are in a hurry.

Ink, toner and supplies

The Konica Minolta magicolor 1690MF uses the following consumables. Match the number exactly when you buy: the same printer family often uses several different cartridge numbers by region.

  • magicolor 1600-series black toner A0V301F (2,500 pages)
  • magicolor 1600-series cyan / magenta / yellow toners (2,500 pages each)
  • Imaging drum unit

High-yield (XL) versions almost always cost less per page if you print regularly. On third-party ink and toner, read our honest assessment first, and note that some manufacturers push firmware that rejects non-original chips.

Full specifications

Print Speed20 ppm mono / 5 ppm colour
Resolution2400 x 600 dpi
DuplexManual
Adf35-sheet ADF
Paper Capacity200 sheets
Display2-line LCD
ConnectivityEthernet, USB 2.0, Fax modem
Mobile
OsWindows 11/10 (legacy driver), macOS (legacy driver), Linux
Dimensions16.9 x 18.3 x 17.3 in
Weight46 lb
Monthly DutyUp to 35,000 pages
ExtraHost-based colour laser MFP; shares the engine of the magicolor 1600W/1650EN; drivers archived on Konica Minolta support
FunctionsPrint, Scan, Copy, Fax

Official drivers and apps

Every link goes to the manufacturer or an official app store. We never host modified installers.

Konica Minolta's official driver page

Problems owners report with this printer

Code or messageWhat it means
Toner Empty [colour]That cartridge is out; the printer will not print even mono until replaced
Drum Life EndImaging drum exhausted
Fuser ErrorFusing unit heating fault; power-cycle

Konica Minolta error codes

All Konica Minolta error codes

Owner reviews

No reviews yet. If you own this model, share what works and what does not.

Write a review

Reviews appear after moderation.

Your rating

Questions & comments (0)

No comments yet. Describe your printer model, operating system and the exact message you see; comments appear after review.

Ask about this page

Your comment appears after our team approves it. Or sign in to post faster.

Still stuck?

Let a printer specialist fix it with you, remotely

Share your screen, we diagnose the driver, Wi-Fi or firmware problem and fix it while you watch. One affordable annual plan covers every printer in your home or office.