Phomemo M200: Setup, Drivers, Ink and Common Problems

Is the Phomemo M200 right for you?

The M200 is an earlier 3-inch Phomemo label printer that sits between the M110 and M220 in the line-up and is still sold in some regions. It uses the same Bluetooth app workflow and accepts the same 80 mm-wide rolls as the M220. Owners mostly use it for address labels and larger product tags.

Best for: Users wanting a 3-inch app-based label printer on a budget

Setting up the Phomemo M200

Connect through the Print Master app over Bluetooth and load rolls print side up. Run label calibration from the app after each roll change. A Windows driver is available for USB printing from a PC if you need to print from spreadsheets.

1. Unbox and prepare. Remove every piece of shipping tape and packing material, install the ink cartridges, and load paper in the tray.
2. Join your Wi-Fi. Keep the printer close to the router for setup. Most printers only connect to the 2.4GHz band, so if your router broadcasts one merged network name you may need to split the bands temporarily. See our Wi-Fi guide if it will not join.
3. Install the setup app. Use Phomemo's official app rather than a driver you found on a search result — third-party driver sites are the most common source of printer malware.
4. Add the printer. On Windows 11: Settings › Bluetooth & devices › Printers & scanners › Add device. On macOS: System Settings › Printers & Scanners › Add Printer.
5. Print a test page and run a scan if this is an all-in-one, so you find any problem now rather than when you are in a hurry.

Ink, toner and supplies

The Phomemo M200 uses the following consumables. Match the number exactly when you buy: the same printer family often uses several different cartridge numbers by region.

• Phomemo M200/M220 thermal label rolls

High-yield (XL) versions almost always cost less per page if you print regularly. On third-party ink and toner, read our honest assessment first, and note that some manufacturers push firmware that rejects non-original chips.

Full specifications