Konica Minolta Bizhub C454e photocopier in an office building

Konica Minolta colour laser — shown for reference; your model may look different. Baron Maddock · CC BY 4.0

Konica Minolta · magicolor colour laser

Konica Minolta magicolor 4750DN: Setup, Drivers, Ink and Common Problems

Colour laser Released 2011 Legacy Around $599 new

The magicolor 4750DN was the last of Konica Minolta's magicolor line, a proper 30 ppm colour laser with auto duplex, PCL and PostScript. It shares its engine with the bizhub C35P and is far easier to keep running than the earlier host-based magicolors because standard drivers work on Windows 11 and macOS. Owners mainly see prompts to replace imaging units, the transfer belt and eventually the fuser.

Sold in United States, Canada, United Kingdom, Europe, Australia

Print speed
30 ppm mono and colour
Two-sided
Automatic
Document feeder
None
Paper capacity
350 sheets standard (250-sheet tray + 100-sheet bypass)
Resolution
600 x 600 dpi (1200 enhanced)
Display
2-line LCD

Is the Konica Minolta magicolor 4750DN right for you?

The magicolor 4750DN was the last of Konica Minolta's magicolor line, a proper 30 ppm colour laser with auto duplex, PCL and PostScript. It shares its engine with the bizhub C35P and is far easier to keep running than the earlier host-based magicolors because standard drivers work on Windows 11 and macOS. Owners mainly see prompts to replace imaging units, the transfer belt and eventually the fuser.

Best for: Small offices with a late-model magicolor that still needs colour printing

Setting up the Konica Minolta magicolor 4750DN

Install the magicolor 4750DN PCL6 or PostScript driver from Konica Minolta's support site, or use the generic Windows and macOS PostScript drivers. Connect over Ethernet, set a static IP from the panel and add by IP. The web interface reports life counters for the four imaging units, belt and fuser so you can plan replacements.

  1. Unbox and prepare. Remove every piece of shipping tape and packing material, install the toner cartridge and drum unit, and load paper in the tray.
  2. Join your Wi-Fi. Keep the printer close to the router for setup. Most printers only connect to the 2.4GHz band, so if your router broadcasts one merged network name you may need to split the bands temporarily. See our Wi-Fi guide if it will not join.
  3. Install the setup app. Use Konica Minolta's official app rather than a driver you found on a search result — third-party driver sites are the most common source of printer malware.
  4. Add the printer. On Windows 11: Settings › Bluetooth & devices › Printers & scanners › Add device. On macOS: System Settings › Printers & Scanners › Add Printer.
  5. Print a test page and run a scan if this is an all-in-one, so you find any problem now rather than when you are in a hurry.

Ink, toner and supplies

The Konica Minolta magicolor 4750DN uses the following consumables. Match the number exactly when you buy: the same printer family often uses several different cartridge numbers by region.

  • A0X5130 black toner (6,000 pages)
  • A0X5430 cyan / A0X5330 magenta / A0X5230 yellow toners (6,000 pages each)
  • Imaging units (four)
  • Transfer belt unit

High-yield (XL) versions almost always cost less per page if you print regularly. On third-party ink and toner, read our honest assessment first, and note that some manufacturers push firmware that rejects non-original chips.

Full specifications

Print Speed30 ppm mono and colour
Resolution600 x 600 dpi (1200 enhanced)
DuplexAutomatic
AdfNone
Paper Capacity350 sheets standard (250-sheet tray + 100-sheet bypass)
Display2-line LCD
ConnectivityEthernet, USB 2.0
Mobile
OsWindows 11/10 (PCL/PostScript), macOS, Linux
Dimensions16.5 x 20.1 x 16.9 in
Weight55 lb
Monthly DutyUp to 120,000 pages
ExtraPCL6 and PostScript 3; same engine as the bizhub C35P; uses A0X5 series toners
FunctionsPrint

Official drivers and apps

Every link goes to the manufacturer or an official app store. We never host modified installers.

Konica Minolta's official driver page

Problems owners report with this printer

Code or messageWhat it means
Replace imaging unit [colour]That imaging unit has reached its life
Transfer belt end of lifeReplace the transfer belt unit
Fuser unit lifeFuser has reached its counted life; replace

Konica Minolta error codes

All Konica Minolta error codes

Owner reviews

No reviews yet. If you own this model, share what works and what does not.

Write a review

Reviews appear after moderation.

Your rating

Questions & comments (0)

No comments yet. Describe your printer model, operating system and the exact message you see; comments appear after review.

Ask about this page

Your comment appears after our team approves it. Or sign in to post faster.

Still stuck?

Let a printer specialist fix it with you, remotely

Share your screen, we diagnose the driver, Wi-Fi or firmware problem and fix it while you watch. One affordable annual plan covers every printer in your home or office.